The smart street light module ACR-SLC is used for remote control of the luminaire, to switch on/off or dim the light, and for its remote diagnostic.
The module communicates over wireless LPWAN network LoRaWAN and uses a DALI output signal for direct control of ballast in the luminaire.
The firmware update can be performed wirelessly over the LoRa network.
If needed, we can provide you with the whole central management system or with a backend solution using REST API for easy integration within your central management system.
¶ Technical specification
| General | |
| Supply voltage: | 12 - 24 VDC |
| Supply voltage tolerance: | -10 /+15 % |
| Standby consumption: | 0.2 W |
| Consumption max.: | 0.5 W |
| Working temperature: | -30 .. +70 °C |
| Storage temperature: | -30 .. +70 °C |
| Operation position: | See manual |
| Mounting: | Socket |
| Protection degree: | IP67 |
| Overvoltage category: | III. |
| Pollution degree: | 2 |
| Dimension: | Ø 40 x 40 mm |
| Weight: | 54 g |
| Communication | |
| Protocol: | LoRaWAN 1.0.4 |
| Registration method: | OTAA |
| Class: | C |
| Transmitter frequency: | 868 MHz (ISM) |
| Transmission power (max.): | 25 mW / 14 dBm |
| Communication interface: | Active DALI (20mA) or passive DALI |
| DALI power detection | Autonomous |
| FUOTA | Yes |
| Temperature sensor | |
| Range: | -30 .. 70°C |
| Accuracy: | ±1°C in the range -10°C .. 70°C |
| ±3°C in the range -30°C .. -10°C | |
| Light sensor | |
| Scanned range: | 5 - 100 000 Lx |
| Detection angle: | 130° |